ABSTRACT
Sixteen compounds were isolated from the ethanol extract of Illigera rhodantha by silica gel, ODS, and Sephadex LH-20 column chromatographies. These compounds were identified as (2R,3R)-2,3-dihydroxy-2-methylbutane-1,4-diyldibenzoate (1), p-hydroxyphenethyl trans-ferulate (2), 4-O-benzoyl-2-C-methyl-D-erythritol (3), N-trans feruloyl-3-methyldopamine (4), tribulusamide A (5), cryptomeridiol (6), teuclatriol (7), oleanolic acid (8), icario A2 (9), vanillic acid (10), p-hydroxybenzoic acid (11), gallic acid (12), ethyl gallate (13), chrysophanol (14), D-1-O-methyl-inositol (15), and hexadecanoic acid (16) based on their spectral data and physico-chemical properties. Compound 1 is an undescribed compound, of which its absolute configurations were determined by Mosher and ROESY methods; all the compounds except 10, 11 and 14 were isolated from Illigera genus for the first time. Compared with the positive control indomethacin, compounds 4-6, 8 and 9 inhibited significantly against the NO production in LPS-induced RAW 264.7 cells.
ABSTRACT
OBJECTIVE@#To compare the retentions of different designs of cobalt-chromium (Co-Cr), pure titanium (CP Ti), and titanium alloy (Ti-6Al-4V) removable partial denture (RPD) circumferential clasps manufactured by selective laser melting (SLM) and to analyze the stress distribution of these clasps during the removal from abutment teeth.@*METHODS@#Clasps with clasp arm size A (1.9 mm width/1.1 mm thickness at the body and 0.8-taper) or B (1.2 times A) and 0.25 mm or 0.50 mm undercut engagement were modeled on a prepared first premolar die, named as designs A1, A2, A3, and A4, respectively. The density and elastic modulus of SLM-built Co-Cr, CP Ti, and Ti-6Al-4V were measured and given to different groups of clasps. The density, elastic modulus, and Poisson ' s ratio of enamel were given to the die. The control group was the cast Co-Cr clasp with design A1, to which the density and elastic modulus of cast Co-Cr alloy were given. The Poisson's ratio of all metals was 0.33. The initial 5 N dislodging force was applied, and the maximum displacement of the clasp along the insertion path was computed. The load was reapplied with an increment of 5 N than in the last simulation until the clasp was completely dislodged. The retentive force range of different groups of clasps was obtained. The retentive forces of the SLM-built Co-Cr, CP Ti, and Ti-6Al-4V clasps with equivalent computed retentive force range to the control group were validated through the insertion/removal experiment. The von Mises stress distributions of these three groups of SLM-built clasps under 15 N loads were analyzed.@*RESULTS@#SLM-built Co-Cr, CP Ti, and Ti-6Al-4V clasps with designs B1 or B2, and Co-Cr clasps with design A2 had higher retentive forces than those of the control group. SLM-built CP Ti and Ti-6Al-4V clasps with design A1 had lower retentive forces than those of the control group. SLM-built Co-Cr clasp with design A1 and SLM-built CP Ti and Ti-6Al-4V clasps with design A2 had equivalent retentive forces to those of the control group. The insertion/removal experiment showed that the measured retentive forces of these three groups of SLM-built clasps were (21.57±5.41) N, (19.75±4.47) N, and (19.32±2.04) N, respectively. No statistically significant measured retentive force difference was found among these three groups of SLM-built clasps (P>0.05). The maximum von Mises stress of these three groups of SLM-built clasps exceeded their responding yield strength except for the Ti-6Al-4V one.@*CONCLUSION@#SLM-built Co-Cr circumferential clasps had higher retention than CP Ti and Ti-6Al-4V ones with the same clasp arm size and undercut engagement. The retention of SLM-built circumferential clasps could be adjusted by changing the undercut engagement and clasp arm size. If SLM-built circumferential clasps are used in clinical practice, the Ti-6Al-4V clasp with clasp arm size A and 0.50 mm undercut engagement is recommended considering the long-term use of RPD in the patient's mouth.
Subject(s)
Humans , Chromium Alloys , Dental Clasps , Denture Retention , Denture, Partial, Removable , Finite Element Analysis , Lasers , TitaniumABSTRACT
@#【Objective】 To study the mutation characteristics of Tyrosine hydroxyls（TH） gene in a pedigree with dopa-responsive dystonia（DRD）. 【Methods】 Extraction of genomic DNA from peripheral blood of a proband and his parents and two sisters using high- throughput sequencing （NGS） method were detected on 256 known pathogenicity genes associated with dystonia and dyskinesia.【Results】Mutations on tyrosine hydroxylase（TH）gene in the exon 14 and exon 9 were detected in the proband and his eldest sister in this pedigree. They had a complex heterozygosity of c.1481C > T（p.Thr494Met）and c.943G >A（p.Gly315Ser），and one heterozygous mutation was carried by parents respectively. The mutation was not detected in his second sister and 50 people with normal phenotype controls. 【Conclusion】 The mutations of TH gene c. 1481C > T（p.Thr494Met）and c. 943G > A（p.Gly315Ser）led to the gene abnormality in DRD family，and a new mutation of TH gene was found，which expanded the relationship between DRD genotype and clinical phenotype. It is vital that early accurate diagnosis and treatment of DRD is the key to improve prognosis.
ABSTRACT
This study is to determine six chlorogenic acids (chlorogenic acid, 5-O-caffeoylquinic acid, 4-O-caffeoylquinic acid, 3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid and 4,5-di-O-caffeoylquinic acid) by quantitative analysis of multi-components with a single marker (QAMS). Chlorogeinc acid was used as internal reference to calculate the relative correction factors (RCF) of five compounds. Then the ruggedness of relative correction factors was tested on different instruments and columns. Meanwhile, a total of 4 batches of Lonicerae Flos and 20 batches of Lonicerae Flos extract with five different processing procedures were analyzed by external standard method (ESM) and QAMS, respectively. The ruggedness of relative correction factors was good. And the analytical results calculated by ESM and QAMS showed no difference. The quantitative method established was suitable for the quality evaluation of Lonicerae Flos extract.
Subject(s)
Biomarkers , Chlorogenic Acid , Chromatography, High Pressure Liquid , Drugs, Chinese Herbal , Flowers , Chemistry , Lonicera , ChemistryABSTRACT
To investigate the distribution of Hepatitis B virus (HBV) genotypes among the population of Dai nationality in Xishuangbanna, Yurman Province HBV genotypes of the Serum samples were tested by PCR-RFLP. This is the first time to discover the B+E genotypes in China. This finding provides new information for understanding the distribution of HBV genotype in China and a provides a basis for establishing a Chinese gene bank.
ABSTRACT
To investigate the distribution of hepatitis B virus (HBV) genotypes and subgenotypes among the Bai nationality in Dali, a total of 100 serum samples from patients with chronic HBV-infection were collected for the detection of HBV genotypes and subgenotypes by genotype-specific primers and restriction fragment length polymorphism (RLFP), respectively. Among the 100 samples, the proportions of genotype B, C and mixed genotype (B+C) were 41%, 25% and 34%, respectively. All the genotype B strains belonged to subgenotype Ba. In genotype C, 84% were Subgenotype Cs and 12% were subgenotype Ce. The distribution of genotypes B, C and B+C showed no significant difference between male and female patients (P=0.182) and among the age groups of patients (P=0.812). The rates of HBeAg/HBeAg positivity were no significantly different among genotypes B, genotype C and mixed genotype (B+C) (P=0.077/P=0.663). In Dali, genotypes B, B+C and C existed among Bai nationality with chronic HBV-infection, and genotype B was the major genotype. Subgenotypes Ba and Cs were the predominant strains in patients with HBV genotype B/C infection. The most prominent characteristic was the higher prevalent rate of mixed genotype (B+C) in patients.